features industrial ethernet solutions supports 1-port 100 mbps single strand fber optic (adam-6542) supports full/half duplex fow control supports integrated loop-up engine supports mdi/mdi-x auto crossover provides broadcast storm protection supports +10~ 30 v dc voltage power input provides surge (eft) protection 3,000 v dc for power line provides fexible mounting: din-rail, wall, stack supports operating temperatures from -10 ~ 65 c embedded a switch controller-supports auto-negotiation embedded a memory buffer-supports store and forward transmission ? ? ? ? ? ? ? ? ? ? ? adam-6542 series specifcations communications standard ieee 802.3, 802.3u, 802.3x lan 10/100base-tx, 100base-fx transmission distance ethernet : up to 100 m fiber: up to 20 km transmission speed up to 100 mbps interface connectors 1 x rj-45 1 x sc type fber connector 2-pin removable screw terminal (power) led indicators power, link (100base-fx), 100/10 m (ethernet) power power consumption max. 3 w power input 1 x unregulated 10 ~ 30 v dc mechanism dimensions (w x h x d) 70 x 112 x 27 mm enclosure ip30, abs+pc with solid mounting kits mounting din 35 rail, wall, stack protection esd (ethernet) 4,000 v dc isolation (ethernet) 1,500 v rms surge (eft for power) 3,000 v dc ? ? ? ? ? ? ? ? ? ? ? ? ? ? environment operating temperature 0 ~ 60 c (32 ~ 140 f) stack : 0 ~ 55 c (32 ~ 131 f) storage temperature -10 ~ 70 c (-14 ~ 158 f) operating humidity 20 ~ 95% (non-condensing) storage humidity 0 ~ 95% (non-condensing) mtbf 550,000 hrs certifcations safety ul 60950-1, can/csa-c22.2 no.60950 emc u.s.a.: fcc part 15 cispr 22 eu: en55011, en61000-6-4 en55022 class a, en61000-3-2/3 en55024 iec61000-4-2/3/4/5/6/8/11 en61000-6-2 ordering information adam-6542/w15 ethernet to wdm single strand fiber optic converter (tx : 1550 nm, rx : 1310 nm) adam-6542/w13 ethernet to wdm single strand fiber optic converter (tx : 1310 nm, rx : 1550 nm) ? ? ? ? ? ? ? ? ? ethernet to wdm fiber optic converters introduction adam-6542 is designed to convert ethernet networks to fber networks. it does so by transparently converting ethernet signals to optic signals. the advantages of fber optics are wide bandwidth, emi immunity and long-distance transmission capability. therefore,adam-6542 is the ideal solution for fber to building applications at central offces or local sites. adam-6542 uses wdm (wavelength division multiplexing) technology, which increases the information-carrying capacity of fber by multiplex transmission and reception of signals at different wavelengths on a singles strand cable. wdm technology is implemented in couples. one site uses an adam-6542/w15 where the transmission channel is 1550 nm and the reception channel is 1310nm. the other site installs an adam6542/w13 where the transmission channel is 1310nm and the reception channel is 1550nm. both the transmission and reception channels of adam-6542/w15 and adam-6542/w13 are multiplexed to a single strand cable. this means that cabling costs are halved when you use adam-6542/w15 and adam-6542/w13 instead of a dual fber converter. adam-6542 support mdi/mdix auto detection, so you dont need to use crossover wires. it also includes a switch controller that can sense the transmission speed (10/100 mbps) automatically. both the ethernet port and the fber port have memory buffers that support store-and-forward mechanisms.
|
